Tokarki

2.   CNC Tokarka Mazak QTN (QUICK Turn Nexus) 100 z roku 2005
      Głowica rewolwerowa na 12 narzędzi Uchwyt 160 kitagawa pneumatyczny, Programowany konik, wrzeciono 6.000 obrotów
      Automatyczny pomiar narzędzi Separator - automatyczny odbiór wyrobów gotowych. Sterowanie CNC MAZATROL 640T plus
      Przystosowana do podajnika pręta, 8.333 godz. pracy.
      Cena loco PT Odbiorca w Polsce 179.000+VAT

3. Tokarskie centrum CNC Takahashi GA23 TMW Microstar TNC-LM2 CNC z osią C i napędzanymi narzędziami
    Additional Equipment: live tools - axial & radial inc changeable angle live tool Chuck Size: 200mm
    Control: FANUC O-T Maximum Cutting diameter: 250mm Maximum Cutting Length: 150mm
    Spindle Bore: 48mm Spindle Speed: 4000rpm Tool Change Capacity: 12 Description:
    C axis & Milling, Coolant, Y-Axis, Low Volt Light, 3 Jaw Chuck, Collet Chuck, Parts Catcher

    Cena loco PT Odbiorca: 227.000 + VAT

4. Tokarka CNC Victor VTurn 26 z podajnikiem pręta - 1999r.
     Additional Equipment: Programmable tailstock Bar Capacity: 75mm Chuck Size: 250mm Control:
     FANUC OTC Distance Between Centres: 610mm Maximum Cutting diameter: 380mm Spindle
     Motor Power: 15kw Spindle Speed: 3500 rpm Swing: 520mm Turret Positions: 10 station VDI40
     Description:
     Coolant, Tailstock, Low Volt Light, 3 Jaw Chuck, Collets, Barfeed, Manuals.

    Cena loco PT Odbiorca w Polsce: 139.000PLN +VAT

5. Tokarka CNC Victor VT Plus 20 CNC z podajnikiem pręta - 2001r.
    Bar Capacity: 52mm Control: FANUC OTC Distance Between Centres: 405mm Maximum Cutting diameter: 260mm
     Spindle Motor Power: 7.5kW, Spindle Speed: 4200 rpm, Swing: 500mm Turret Positions: 12 station VDI30
     Description:
     Coolant, Tailstock, Low Volt Light, 3 Jaw Chuck, Collets

     Cena loco PT Odbiorca w Polsce: 115.000PLN+VAT

6. Tokarka CNC SPINNER TC67L - 1997r.
     Bar Capacity: 67mm Control: FANUC OT Maximum Cutting diameter: 298mm, Maximum Cutting Length: 580mm
     Spindle Motor Power: 11kW Swing: 450mm Turret Positions: 12 station VDI
     Description:
     Tool setter, Coolant, Tailstock, Low Volt Light, Manuals, Tooling.

     Cena loco PT Odbiorca w Polsce: 109.000PLN+VAT

7. Tokarskie centrum obróbcze Nakamura TW-20MM z systemem załadowczym typu gantry - 1997r.
    Additional Equipment: Gantry Loader, C axis to both Spindles, Bar Capacity: 64mm, C axis: 0.001 Degree both
     Spindles, Control CNC: FANUC 16TT, Maximum Cutting diameter: 270mm, Maximum Cutting Length: 190mm
     Milling RPM: 6000rpm Number of axis controlled: 6 Spindle Motor Power: 18kW Spindle Nose: A2-5, Spindle
     Speed: 45 - 5000rpm, Turret Positions: 12 Station each Turret (2 off)
     Description:
     Sub Spindle, Swarf conveyor, Coolant, 3 Jaw Chuck, Parts Loader, Twin Turret

    Cena loco PT Odbiorca w Polsce: 330.000PLN + VAT.

8. Tokarskie centrum obróbcze z napędzanymi narzędziami Mazak Integrex 30 - 1995r.
      Driven Tools, Motor Power: 7.5kW (10 HP), CNC: Mazatrol TPLUS, Maximum Machining Diameter: 510mm, Maximum Length: 1500mm,
      Spindle Speed: 3500 rpm, Driven Tools Max Spindle Speed: 6000 rpm, Turret Positions: 80 Position. (Yes, EIGHTY) C axis: 0,01 degree,
      Spindle Motor Power: 22kW (30HP) Taper: BT40 Additional Equipment: Selling from Site.
      Description:
      Swarf conveyor, Low Volt Light, Tooling, C axis, Automatic Vertical/Horizontal Swivelling Head

      Cena loco PT Odbiorca w Polsce: 199.000PLN+VAT

9. Tokarskie centrum obróbcze z napędzanymi narzędziami, przeciwwrzecionem Hyundai - Kia SKT250 - 2005r.
     Chuck Size: 500mm, Control CNC: Fanuc 18i, Turret Positions: 12 Station,
     Description:
     C axis & Milling, Sub Spindle, Swarf conveyor, Tool setter, Low Volt Light, 3 Jaw Chuck, Parts Catcher,
     Tooling, C axis, Parts Counter, C Axis (0.001deg) on Sub Spindle.

     Cena loco PT Odbiorca w Polsce: 380.000PLN+VAT

10. Tokarskie centrum obróbcze 5 osiowe, HITACHI SEIKI HICELL 40 - 1995r. napędzane narzędzia, magazyn narzędzi 30poz., konik
       SUPER PRODUCTIVE INTEGRATED TURNING CELL WITH 30 STATION ATC. SEICOS LIII CONTROL.
       Control SEICOS LIII, Turning length 1000MM, Turning diameter 380MM, Swing over bed 700MM DIAMETER,
       Spindle speeds 20-1800 RPM, Number of stations on turret 8, Number of live stations 2, Spindle bore 120MM DIAMETER,
       Z axis stroke 1050MM, X axis stroke 330MM, Y axis stroke 200MM+/-100MM, Feed rate CUTTING-X & Z=0.001MM-999MM PER REV,
       Y=0.01MM-500MM PER REV Rapid Traverse X=15 METRES PER MINUTE, Y=10 METRES PER MINUTE, Z=20 METRES PER MINUTE,
       Rotating tools speed 100-2000 RPM Tool DIAMETER 120MM MAXIMUM, LENGTH 300MM MAXIMUM, WEIGHT 10 KGS
       Input 415/3/50 AC 22 KW
       Equipment
       TAILSTOCK (B AXIS), CHUCK (C AXIS), SWARF CONVEYOR, COOLANT, 400MM 6 JAW CHUCK, MANUAL PROBE AND LARGE QUANTITY
       OF TOOLING Length 17' (5.18M) Width 10'10" (3.3M) Height 8'10" (2.69M) Nett weight approx. 13 TONS (13,208 KGS)

       Cena loco PT Odbiorca w Polsce: 359.000PLN +VAT

11. Tokarka CNC MAZAK SQT-200 2 osie sterowane - 1998r.

Control CNC: MAZATROL T PLUS
Turning length 500MM
Turning diameter 300MM
Spindle speeds 35-5000 RPM
Bar capacity 50MM
Number of stations on turret 12
Tail stock YES
Feed rate 30 METERS PER MINUTE
Input 400/3/50 AC 25 HP APPROX
3 jaw chuck KITAGAWA 200MM
Fitted with SWARF CONVEYOR & PROBE
Length 11' (3.35M)
Width 6'4" (1.93M)
Height 6'4" (1.93M)
Nett weight approx. 5 TON (5080 KGS)
Power On Hours 9877 HOURS
Auto Cut Hours 139 HOURS
Auto Operation Hours 1425 HOURS
Total Cutting Hours 7760 Hours

Cena loco PT Odbiorca w Polsce: 145.000PLN+VAT

12. Tokarskie centrum obróbcze z napędzanymi narzędziami TRAUB TNA300 -1996r.

Control TRAUB SYSTEM TX8H
Turning length 450MM
Turning diameter 275MM
Swing over bed 520MM
Swing over cross slide 395MM
Spindle speeds UP TO 4000 RPM
Bar capacity 65MM
Number of stations on turret 12
Number of live stations 12
Tail stock YES
Z axis stroke 450MM
X axis stroke 210MM
Feed rate RAPID X-15 METERS PER MINUTE, Z-18 METERS PER MINUTE
Input 415/3/50 AC 11 KW
Hydraulic stroke of barrel 60MM
3 jaw chuck 230MM DIAMETER
Fitted with QUANTITY OF TOOLING INCLUDING DRIVEN TOOLS
Equipment SWARF CONVEYOR
Bar feed TRAUB STAMAG DNH61 3.2 METERS LONG
Length MACHINE: 9'6" (2.9M), BAR FEED: 16' (4.88M)
Width MACHINE: 6'2" (1.88M), BAR FEED: 4' (1.22M)
Height MACHINE: 6'2" (1.88M), BAR FEED: 4'6" (1.37M)
Nett weight approx. 4 TON 10 CWTS (4572 KGS)

Cena loco PT Odbiorca w Polsce: 225.000+VAT

13. Tokarskie centrum pionowe dwuwrzecionowe i dwupaletowe model DOOSAN I330 330MM - 2002r.

Control CNC: FANUC 18-T
Turning length 250MM MAXIMUM
Turning diameter 330MM MAXIMUM
Facing diameter 100 KGS MAXIMUM
Swing over bed 400MM
Number of stations on turret 12
Z axis stroke 260MM
X axis stroke 710MM
Feed rate MAXIMUM 4000 RPM, NOMINAL 360 RPM
Gap piece casting X=40 METRES PER MINUTE, Z=32 METRES PER MINUTE
Gap in front of face plate 0.001-500MM PER MINUTE
Input 415/3/50 AC 15 KW
Chuck size 200MM DIAMETER
Length 12' (3.66M)
Width 7'7" (2.31M)
Height 9' (2.74M)
Nett weight approx. 8 TONS 10 CWTS (8636 KGS)

Cena loco PT Odbiorca w Polsce: 159.000PLN +VAT

1. Tokarki CNC VICTOR 2003, 2004, 2005 - w różnych konfiguracjach, z nap. narz., przeciwwrzecionem i podajnikiem pręta

     Rok produkcji:2003; Producent: Victor - USA, Model:Vturn II 26 z osią C; Sterowanie CNC:FANUC 21iTB;
     Długość toczenia: 650mm; Max średnica toczenia:380mm; Posuwy przyśpieszone:X/Z 12/15m/min; Przestrzeń
     obróbcza nad prowadnicami/osłonami-średnica: 520mm; Przestrzeń obróbcza na prowadnicami
     poprzecznymi:350mm; Średnica otworu wrzeciona:75mm; Pozycjonowanie w osi C: 0.001 st.; Silnik napędu
     wrzeciona:18.5kW; Końcówka wrzeciona:A2-8 Obroty wrzeciona:3500obr/min; Stożek tulei konika: MT#4;
     Głowica narzędziowa VDI:10poz.; Obroty narzędzi napędzanych:3000obr/min & 2,2kW; Opis dodatkowy: oś C &
     frezowanie, transporter odpadów, układ chłodzenia, konik, system blokad wewnętrznych, 3-szczękowy uchwyt,
     chwytak detali obrobionych. Cena brutto loco PT Odbiorca w Polsce: 295.000PLN 379.000, 343.000PLN;